한외여과장치 5set 구매공급사업 견적요청의 E-Market 메시지

한외여과장치 5set 구매공급사업 견적요청의  E-Market 메시지 

1식  ￦100,500,000원 이하  120일 이내 충청권에 설치도

검토와 일괄총액의 견적서로 답신주시고 매출증대일익을 협의하십시요

누락파일이나 추가적인 자료요청은 통화대신 메일소통이 효율적입니다

성과를 위한 관급프로젝트의 파트너사 -  제이앤에스 관리자와 운영인

관리인 메일 nhbbc@naver.com sms 070-4644-8617 팩스 050-5115-5372

운영자와의 멘토 010-5670-5227  보이스마켓과 쇼핑몰은 정중히 사양

I. 용도(End-user's Use)
 1. 단백질 농축 및 투석 시 사용 될 장비
 2. Pyrogen, NaCl, Salt 제거 및 Buffer Exchange에 용이한 장비
 3. 세포배양 및 바이러스배양 정제시 필요한 장비

II. 장비의 구성(System Configuration of Goods)
 Part I
 1. 본체 (Main body)
  1) Ultrafiltration/Diafiltration Main Unit       4set
 2. Accessories
  1) UF membrane 50cm2                     12pk
  2) Multi Manifolder                          4pk
  3) One Way Stop Cock Valve                1pk
  4) Tank vent filter                           1pk

 Part II
 1. 본체 (Main body)
  1) Ultrafiltration/Diafiltration Main Unit     1set
 2. Accessories
  1) UF membrane 0.1m2                   3pk
  2) Retentate Flow Meter kit               1pk
  3) Transfer pump console(230VAC)        1pk

III. 성능 및 규격(Performance and Specification)
A. FEATURE
Part I
1. Applications
 1) Concentration and diafiltration
 2) Depyrogenation
 3) Desalting and buffer exchange
 4) Small molecule processing
 5) Cell harvesting/ clarification
 6) Virus harvesting/ clarification

2. Feature of System
 1) Single unit system which can be used in the laboratory
 2) Easily create accurate scale down models for process development, membrane screening and process           
characterization at the micro-scale
 3) The fluid path is drainable and designed for Clean-in-Place(CIP) using industry standard cleaning agents.
 4) Tank material is Acrylic see in Product  
 5) MF/UF membrane can be used
 6) Linear scale-up
 7) Robust design with minimal maintenance requirement
 8) Possible minimum working volume : 15 mL
 9) Stir base system to mix solution in the reservoir
10) This system is able to control TMP using pressure control of circulation flow
11) User's manual

3. Feature of Membrane
 1) Maximum Transmembrane Pressure : 5 bar
 2) Promotor in the membrane channel(from A screen to V screen): to generate turbulence flow
 3) Polyurethane Frame to keep linear path length
 4) Low protein binding MF membrane material(PVDF) of module
 5) 2 kinds type of UF membrane of UF membrane module
 6) Void Free UF membrane
 7) Validation Guide/Maintenance Guide

Part II
1. Applications
 1) Concentration and diafiltration
 2) Depyrogenation
 3) Desalting and buffer exchange
 4) Small molecule processing
 5) Cell harvesting/ clarification
 6) Virus harvesting/ clarification

2. Feature of System
 1) Load cell
 2) Automatic TMP(Trans Membrane Pressure) control suited for process development
 3) Tank material is Epoxy or Borosilicate Glass that see in Product  
 4) sanitary-design according to cGMP concept
 5) MF/UF membrane can be used
 6) Linear scale-up
 7) Closed special tank-in-tank design
 8) Possible minimum working volume : 170- 300 mL
 9) System is designed for cGMP batch or scale up/scale down studies.
 10) Design through combination of minimal pumping and a special vertical orientation of pump
   (diaphragm pump)

3. Feature of Membrane
 1) Maximum Transmembrane Pressure : 4 - 6bar
 2) Polyurethane Frame to keep linear path length
 3) Low protein binding MF membrane material(PVDF) of  UF membrane module
 4) Void Free UF membrane
 5) Wide range of membrane material, cut-off size(5kD~1000kD), pore-size(0.1um~0.65um)
 6) Validation Guide/Maintenance Guide

 B. SPECIFICATION

Part I
   
 1. Cassette
   UF membrane (not included) ( filter area : 150 cm2)
 
 2. Cassette Holder
    UF membrane holder

 3. Vent Filter
   Air Filter

 4. Filtration Area
   50 cm2 – 150 cm2

 5. Tank Volume & Meterial
   500 ml, Acrylic tank ( Product see proccessing  )

 6. Hold-up Volume
   < 3.2 mL (excluding cassette)

 7. Pumps
   Feed ( Peristaltic pump ) : 10 – 100 ml /min

 8. Maximum System Pressure
   5.5 barg

 9. Minimum Recirculation Volume at Maximum Flow Rate
   15 mL

10. Process Temperature
   4 – 45 °C (  It can use in cold roon )

11. Operational Requirements
   Electrical : Voltage/Current — Single Phase
              230 VAC 50 Hz

   Tubing : LFL Tygon tubing

   Luer fittings : 316 stainless steel/Polypropylene

   Reservoir cover : Polypropylene

   Retentate valve diaphragm : EPDM and polypropylene

   Stir bar : PTFE

   Housing/enclosure : Polyurethane

12. Environmental Operating Conditions
   Humidity : 10 – 85% non-condensing environment
  
   Temperature range : Ambient operational: 4 °C to 30 °C
                       Process:             4 °C to 50 °C
                       Storage:          –10 °C to 55 °C
 
   Maximum altitude : < 2000 meters

13. Dimensions
   Height: 45.7 cm (18 in.)
   Width: 21.6 cm (8.5 in.)
   Depth: 27.9 cm (11 in.)
   Weight: 5.9 kg (13 lbs)

14. Wetted Materials
   All polymer wetted materials of construction are USP Class VI tested.

15. System Setup
   1) Unit shipped requires setup.
   2) UF membrane (not included) are installed by supplier & user. ( in Basic Trainning )
   3) Operating is by supplier & user ( in Basic Trainning )

16. Accessary
  1) UFmembrane 50cm2                    12pk
  2) Multi Manifolder                        4pk
  3) One Way Stop Cock Valve              1pk
  4) Tank vent filter                         1pk

Part II

1. Cassette
    UF membrane(not included) ( filter area : 0.1 - 0.5m2 )
 
 2. Cassette Holder
    UF membrane holder

 3. Vent Filter
   Air filter membrane

 4. Filtration Area
   0.1 m2 – 2.0 m2

 5. Tank Volume & Meterial
   5 ~ 10 L, Tank meterial is Epoxy or Borosilicate Glass that see in Product

 6. Tank Mixer Volume
   1.5 - 10 L

 7. Hold-up Volume
   5 ~ 10 mL (excluding cassette)

 8. Pumps
   Feed ( Diaphram pump ) : 0.2 – 12 L/min at 6 barg
   Transfer ( Peristaltic pump ) (option): 0.16 – 2300 mL/min (tubing dependent)

 9. Heat Exchanger (option)
   0.2 kW, 48kcal control

10. Retentate Flow Meter (option)
   Minimum conductivity: ≥ 5 µS/cm
   Accuracy: ± 0.5%

11. Maximum System Pressure
   6 barg prior to pump shut off

12. Minimum Recirculation Volume
   170ml - 300 mL

13. Process Temperature
   0 – 50 °C (  It can use in cold roon )

14. Connection Hoses
   1.0 bar maximum

15. Operator Interface
   PLC via a touch screen

16. Operational Requirements
   Electrical : Voltage/Current — Single Phase
              100 VAC 50 Hz, 100 VAC 60 Hz,
              120 VAC 60 Hz, 230 VAC 50 Hz

   Amperage (maximum) : Europe: 2.5 amps
                          North America and Japan: 5 amps

   Over voltage category : Category II

   Compressed air : Maximum 60 psi/413 kPa
                   –20 °C dew point, oil-free

17. Environmental Operating Conditions
   Humidity : 10 – 85% non-condensing environment
  
   Temperature range : Ambient operational: 2 °C to 30 °C
                       Process:             0 °C to 50 °C
                       Storage:          –10 °C to 55 °C
 
   Maximum altitude : < 2000 meters

18. Dimensions
   Height:  94 - 110 cm (37 - 45 in.)
   Width:   48 - 80 cm (19 - 32 in.)
   Depth:   44 - 68 cm (18 - 27 in.)
   Weight:  50 - 59 kg

19. Wetted Materials of Construction
   EPDM, 316L stainless steel, Santoprene® elastomer, medical grade epoxy, and silicone

20. Surfaces
   Stainless steel – internal : < 0.6 - 0.8 µm, Ra
   External :                 < 0.8 - 1.34 µm, Ra

21. Wetted Materials
   All polymer wetted materials of construction are USP Class VI tested.

22. System Setup
   1) Unit shipped requires setup.
   2) UF membrane (not included) are installed by supplier & user. ( in Basic Trainning )
   3) Operating is by supplier & user ( in Basic Trainning )

23. Regulatory Information
   The UF system meets the requirements of the Low Voltage Directive
   73/23/EEC and the EMC Directive 89/336/EEC, and is CE marked.

24. Accessary
   1) UF membrane 0.1m2                  3pk
   2) Retentate Flow Meter kit              1pk
   3) Transfer pump console(230VAC)       1pk
 
      
IV. Remarks       
 1. The installation and operation should be performed by bidder at user side.
 2. Two years warranty service should be provided by supplier after the date of installation.
 3. After service certification should be submitted by local agency